Indian standard code list for civil engineering

REFERENCE CODES & STANDARDS FOR CIVIL ENGINEERING AS PER

BUREAU OF INDIA STANDARDS (IS)

Following are key codes & standards to remember for Civil Estimators to prepare the tender/bid proposal in correct manner.

Codes & Standards are published documents that establish specifications and procedures designed to ensure the reliability of the materials, products, methods, and/or services use in construction industry.

These Codes & Standards also make it easier to understand and compare competing products.

Download : reference-codes-standards-for-civil-engineering-as-per-bureau-of-indian-standards-bis

EARTH WORKS

MORTARS

CONCRETE WORKS

REINFORCED CEMENT CONCRETE WORKS

BRICK WORK

STONE WORK

MARBLE WORK

WOOD WORK & PVC WORK

STEEL WORK

FLOORING WORK

ROOFING WORK

FINISHING WORK

REPAIRS TO BUILDING WORK

DISMANTLING & DEMOLISHING WORK

ROAD WORK

SANITARY INSTALLATIONS WORK

WATER SUPPLY  WORK

DRAINAGE  WORK

PILE  WORK

ALUMINIUM WORK

WATERPROOFING TREATMEATMENT WORKS

 

EARTH WORKS

IS 632                          :           Gamma – BHC (Lindane) emulsifiable concentrates

IS 1200 (Pt 1)              :           Method of measurement of earth work

IS 1200 (Pt-27)                        :           Method of measurement of earth work (by Mechanical Appliances )

IS 4081                        :           Safety code for Blasting and related drilling operation

IS 4988 (Part IV)          :           Excavators

IS 6313 (pt-II)              :           Anti Termite measures in buildings (pre -constructional)

IS 6313(pt.-III)             :           Anti Termite Measures in Buildings for existing buildings

IS 6940                        :           Methods of test for pesticides and their formulations

IS 8944                        :           Chlorpyrifos emulsifiable concentrates

IS 8963                        :           Chlorpyrifos – Technical specifications

IS 12138                      :           Earth moving Equipments

MORTARS

1 IS 269                       :           Specification for 33 grade ordinary Portland cement

2 IS 383                       :           Specification for coarse and fine aggregate from natural source for concrete.

3 IS 455                       :           Specification for Portland slag cement.

4 IS 460 (Part I)           :           Specification for test sieves: wire cloth test sieves.

5 IS 650                       :           Specification for standard sand for testing of cement

6 IS 1269                     :           Specification for 53 grade ordinary Portland cement

7 IS 1344                     :           Specification for calcined clay Pozzolana.

8 IS 1489                     :           Specification for Portland pozzolana cement

9 IS 1542                     :           Specification for sand for plaster

10 IS 1727                   :           Methods of Test for Pozzolanic materials

11 IS 2116                   :           Specification for sand for masonry mortar.

12 IS 2250                   :           Code of practice for preparation and use of masonry Mortar.

13 IS 2386 (Pt-I)          :           Method of test for aggregate for concrete (Particle size and shape)

14 IS 2386 (Pt-II)         :           -Do- Estimation of deleterious materials and organic impurities.

15 IS 2386 (Pt-III)        :           -Do- Specific gravity, density, voids, absorption and bulking.

16 IS 3025                   :           Method of sampling and test for water

17 IS 3406                   :           Specification for masonry cement.

18 IS 3812 (Part I)       :           Specification for flyash for use as pozzolana in cement mortar and Concrete

19 IS 3812 (Part II)      :           Specification for flyash for use as admixture in cement martar and Concrete

20 IS 4031 (Part I) to (Part XIII)                     :           Method of Physical test for hydraulic cement

21 IS 4032                   :           Method of chemical analysis of Hydraulic cement.

22 IS 8041                   :           Rapid hardening Portland cement.

23 IS 8042                   :           Specification for white cement

24 IS 8043                   :           Hydrophobic Portland cement

25 IS 8112                   :           Specification for 43 grade ordinary Portland cement

26 IS 11652                 :           Woven HDPE sacks for packing cement

27 IS 11653                 :           Woven polypropylene sacks for packing cement

28 IS 12174                 :           Jute synthetic union bags for packing cement

 

 CONCRETE WORKS

  1. IS 383 : Specification for coarse and fine aggregate from natural sources for concrete.
  1. IS 456 : Plain and reinforced concrete – Code of practice
  1. IS 516 : Method of test for strength of concrete
  1. IS 1199 : Method of sampling and analysis of concrete
  1. IS 1200(Part II)   :           Method of measurement of building and civil engineering work (concrete work)
  1. IS 1322 : Specification for bitumen felt for water proofing and damp proofing.
  1. IS 1791 : General requirements for batch type concrete mixers
  1. IS 2386 : Method of test for aggregates for concrete

(a) Part I                       :           – Particle size and shape

(b) Part II                     :           – Estimation of deleterious materials and organic impurities

(c) Part III                     :           – Specific gravity, density, voids absorption and bulking.

(d) Part IV                    :           – Mechanical properties.

(e) Part V                     :           – Soundness

  1. IS 2505 : General requirements for concrete vibrators – immersion type.
  1. IS 2506 : General requirements for concrete vibrators – screed board concrete Vibrators
  1. IS 2645 : Specification for integral water proofing compounds for cement mortar and concrete
  1. IS 3068 : Specification for broken brick (burnt clay) coarse aggregate for use in concrete.
  1. IS 3812 : Specification for flyash for use as pozzolana and admixture in cement mortar and concrete.
  1. IS 4656 : Specification for form vibrators for concrete.
  1. IS 7861(Part-I)     :           Code of practice for extreme weather concreting (Part-I) Recommended practice for                                                 hot weather concreting.
  1. IS 7861(Part–II)   :           Code of practice for extreme weather concreting (Part-II) recommended.
  1. IS 9103 : Specification for concrete admixtures

 REINFORCED CEMENT CONCRETE WORKS

  1. IS 226 : Structural Steel
  1. IS 432 (Part I) : Specification for mild steel and medium tensile steel bars and hard Drawn steel wire for                                          concrete reinforcement part-I mild steel and medium tensile steel bars.
  1. IS 432 (Part II) : Specification for mild steel and medium tensile steel bars and hard Drawn steel wire for                                             concrete reinforcement – Part-II hard drawn steel wire.
  1. IS 456 : Code of Practices for plain and Reinforced concrete.
  1. IS 516 : Method of test for strength of concrete.
  1. IS 716 : Specification for pentachlorophenol
  1. IS 1199 : Method of sampling and analysis of concrete.
  1. IS 1200 (Part II) : Method of measurement of building and civil engineering work –Concrete work
  1. IS 1200 (Part V) : Method of measurement of building and civil engineering work –Concrete work (Part 5-                                          Form work)
  1. IS 1566 : Specification for hard drawn steel wire fabric for concrete requirement.
  1. IS 1599 : Method for bend test
  1. IS 1343 : Code of Practice for Prestressed Concrete
  1. IS 1608 : Method for tensile testing of steel products
  1. IS 1786 : Specification for high strength deformed steel and wires for concrete reinforcement.
  1. IS 1791 : Specification for batch type concrete mixes
  1. IS 2502 : Code of practice for bending and fixing of bars for concrete reinforcement.
  1. IS 2751 : Recommended practice for welding of mild steel plain and deformed Bars for reinforced construction.
  1. IS 4925 : Batch plants specification for concrete batching and mixing plant
  1. IS 4926 : Ready – Mixed Concrete
  1. IS 6523 : Specification for precast reinforced concrete door, window frames
  1. IS 10262 : Recommended guidelines for concrete mix design
  1. IS 13311(Part I)         :           Indian standard for non-destructive testing of concrete. Method of test For                                                                   ultrasonic pulse velocity
  1. IS 13311(Part II)        :           Indian standard for non-destructive testing of concrete. Method of Testing by                                                             rebound hammer

BRICK WORK

1  IS 712 : Specification for building limes.

  1. IS 1077 : Common burnt clay building bricks.
  1. IS 1200 (Part 3) : Method of measurements of brick works
  1. IS 2212 : Code of practice for brick work. (1st Revision)
  1. IS 2222 : Specification for burnt clay perforated building bricks.
  1. IS 2849 : Specification for non load bearing gypsum partition blocks, (Solid and hollow types)
  1. IS 3495 : Method of test for burnt clay building bricks.
  1. IS 3812 : Specification for fly ash for use as pozzolana and admixture.
  1. IS 4139 : Specification of calcium silicate bricks
  1. IS4885 : Specification for sewer brick
  1. IS 5454 : Methods of sampling of clay building bricks.
  1. IS 12894 : Pulverized fuel ash lime bricks specification,
  1. IS13757 : Specification of burnt clay fly ash bricks.

 STONE WORK

  1. IS 737 : Specifications for wrought aluminium and aluminium alloy, steel and strip for general engineering                        purpose.
  1. IS 1121 – (Pt. I) : Methods of determination of properties and strengths of natural Building stones (Part-I                                           compressive strength).
  1. IS 1122 : Methods for determination of specific gravity of natural building stone
  1. IS 1123 : Methods of identification of natural building stones.
  1. IS 1124 : Methods of test of determination of water absorption, apparent, Specific gravity and porposity of                            natural building stones.
  1. IS 1125 : Methods of test of determination of weathering of natural building Stone
  1. IS 1126 : Methods of test for determination of durability of natural building stone
  1. IS 1128 : Specification for Lime stone (Slab & Tiles).
  1. IS 1129 : Recommendations for dressing of natural building stones.
  1. IS 1200 (Pt. IV) : Methods of measurements of building and Civil engineering works Stone Masonry.
  1. IS 1197 (Pt. I) : Code of practice for construction of rubble stone masonry
  1. IS 1597 (Pt. II) : Code of practice for construction of ashlar stone masonry
  1. IS 1805 : Glossary of terms relating to stones, quarrying and dressing
  1. IS 3620 : Specification for latrite stone block for masonry
  1. IS 3622 : Sand stone (Slab & Tiles)
  1. IS 4104 (Pt. I) : Code of practice for external facings and veneers (Part I-Stone facing).
  1. IS 4101 (Part II) : Code of practice for external facing and veneers: (Part II-Cement Concrete facing).

MARBLE WORK

  1. IS 1122 : Method of test for determination of true specific gravity of natural building stones.
  1. IS 1124 : Method of test for determination of water absorption, apparent Specific gravity and porosity of                                natural building stones.
  1. IS 1130 : Marble (blocks, slabs and tiles).
  1. IS 4101 (Part 1) : Code of practice for external facing and veneers: Stone facing.
  1. IS 3316 : Specifications for structural granite
  1. IS 14223 (Part 1) : Polished Building Stones (Part-1) Granite

 WOOD WORK & PVC WORK

  1. IS 204 (Part I) : Specification for tower bolts (ferrous bolt)
  1. IS 204 (Part II) : Specification for tower bolts (non ferrous metals)
  1. IS 205 : Specification for non ferrous metal butt hinges
  1. IS 206 : Specification for Tee and strap hinges
  1. IS 207 : Specification for Gate and shutter hook and eye
  1. IS 208 : Specification for door handles
  1. IS 281 : Specification for mild steel door bolts for use with pad locks
  1. IS 287 : Recommendations for maximum permissible moisture contents of timber used for different purpose
  1. IS 303 : Specification for plywood for general purposes
  1. IS 362 : Specification for parliament hinges
  1. IS 363 : Specification for hasps and stapple
  1. IS 364 : Specification for fan light catch
  1. IS 401 : Code of practice for preservation of timber
  1. IS 419 : Putty for use on window frames
  1. IS 451 : Technical supply condition for wood screws
  1. IS 452 : Specification for door spring rat tail type
  1. IS 453 : Specification for double acting spring hinge
  1. IS 707 : Glossary of terms applicable to timber technology and Utilization
  1. IS 710 : Specifications for Marine Plywood
  1. IS 723 : Specification for steel counter sunk head wire nails.
  1. IS 729 : Specification for drawer lock, cup board lock and box locks
  1. IS 848 : Specification for synthetic resin adhesive for plywood (phenoic and amino plastic)
  1. IS 851 : Specification for synthetic resin adhesive for const. work (non structural in wood)
  1. IS 852 : Specification for animal glue for general wood work purpose
  2. IS 1003 (Part I) : Specification for timber panelled and glazed shutter Part I(door shutters)
  1. IS 1003 (Part II) : Specification for timber panelled and glazed shutter Part II(window and ventilator shutter)
  1. IS 1141 : Specification for code of practice for seasoning of timber
  1. IS 1200 Part XIV : Method of measurement of building and civil engg work glazing.
  1. IS 1200 Part XII : Wood work and joinery
  1. IS 1328 : Specification for veneered decorative plywood
  1. IS 1341 : Specification for steel butt hinges
  1. IS 1378 : Specification for oxidized copper finishes
  1. IS 1566 : Specification for hard drawn steel wire fabric
  1. IS 1568 : Specification for wire cloth for general purpose
  1. IS 1658 : Specification for hard drawn steel wire fabric
  1. IS 1659 : Specification for block boards
  1. IS 1708 (Part 1 to 18)       :           Testing of small clear specimen for timber
  1. IS 1734 : Determination of density and moisture content.
  1. IS 1823 : Specification for floor door stopper
  1. IS 1868 : Specification for anodic coating on aluminium and its alloy
  1. IS 2046 : -do- Decorative thermosetting synthetic resin bonded laminated sheet
  1. IS 2095 : pecification for gypsum plaster board
  1. IS 2096 : Specification for asbestos cement flat sheet.
  1. IS 2202 (Pt I) : Specification for wooden flush door shutter, solid core type (plywood face panels )
  1. IS 2202 (Part II ) : -do- (Particle boards and hard board face panels)
  1. IS 2209 : Specification for mortice lock (Vertical Type )
  1. IS 2380 : Method of test for wood particle board and board for Lignocelluloses material
  1. IS 2547 : Specification for gypsum plaster
  1. IS 2753 : Method for estimation of preservatives in treated timber and in treating solutions.
  1. IS 2681 : Specification for non-ferrous metal sliding door bolts use with pad locks
  1. IS 3087 : Specification for wood particle boards (Medium density) for General purpose.
  1. IS 3097 : Specification for veneered particle board

53 IS 3828                               :           Specification for ventilator chain

54 IS 3400 (Part II)                  :           Method of test for Vulcanized rubber (hardness)

  1. IS 3400 (Part IV) : Accelerated aging
  1. IS 3400 (Part IX) : Density
  1. IS 3564 : Specification for door closer (hydraulically regulated)
  1. IS 3618 : Phosphate treatment of iron and steel for protection against Corrosion
  1. IS 3813 : “C” hooks for use with swivels

60 IS 3818     :           Specification for continuous (Piano) hinges

  1. IS 3847 : Specification for mortice night latch
  1. IS 4835 : Specification for polyvinyl acetate dispersion based adhesive for wood
  1. IS 4948 : Specification for welded steel wire fabric for general use
  1. IS 4992 : Specification for rebated mortice lock
  1. IS 5187 : Specification for flush bolts

66 IS 5509     :           Specification for Fire Retardant Plywood

  1. IS 5930 : Specification for mortice latch
  1. IS 6318 : Specification for plastic wire window fastners
  1. IS 6607 : Specification for rebated mortice lock (Vertical type)
  1. IS 6760 : Specification for sloted counter sunk head wood screws.
  1. IS 7196 : Specification for hold fast
  1. IS 7534 : Specification for sliding locking bolts for use with pad lock
  1. IS 7638 : Wood/lignocellulosic based panel products – Method for Sampling
  1. IS 8756 : Specification for mortice ball catch for use in wooden almirah
  1. IS 9308 (Part II) : Specification for mechanically extracted coir fibres. (Mattress coir fibres)
  1. IS 9308 (Part III) : -do- Decorated coir fibre
  1. IS 11215 : Moisture content of timber and timber products method of Determination
  1. IS 12049 : Dimensions and tolerance relating to wood based panel Materials
  1. IS 12406 : Specification for medium density fibre board
  1. IS 12817 : Specification for stainless steel Butt Hinges
  1. IS 12823 : Specification for wood products –Prelaminated particle Boards
  1. IS 14616 : Specifications for laminated veneer lumber
  1. IS 14842 : Specification for coir veneer board for general purposes
  1. IS 14856 : Specification for glass fibre reinforced plastic (FRP) panel type door
  1. IS 14900 : Specifications for transparent float glass

 STEEL WORK

1 IS 63                                     :           Whiting for paints and putty

2 IS 198                                   :           Varnish gold size

3 IS 228                                   :           Structural steel (Standard quality)

4 IS 277                                   :           Specification for galvanized steel sheets (Plain and corrugated)

5 IS 800                                   :           Code of practice for use of structural steel in general in steel Construction

6 IS 806                                   :           Code of practice for use of steel Tubes in general building Construction

  1. IS 808 : Dimensions for Hot rolled steel beams, columns, channel and Angle sections
  1. IS 812 : Glossary of terms relating to welding and cutting metals
  1. IS 813 : Scheme of symbols for welding

10 IS 814      :           Covered electrodes for manual metal arc welding of carbon and carbon manganese steel

11 IS 816                                 :           Code of practice for use of metal arc welding for general construction in mild steel

12 IS 817                                 :           Code of practice for training and testing of metal arc welders

13 IS 818 : Code of practice for safety and healthy requirements in electric and gas welding and cutting operations

14 IS 822                                 :           Code of procedure for inspection of welds

15 IS 823                                 :           Manual for metal arc welding in mild steel

16 IS 1038                               :           Steel doors, windows and ventilators

17 IS 1081 :  Code of practice for fixing and glazing of metal (Steel and aluminium) doors, windows and ventilators

18 IS 1148                               :           Hot rolled steel rivet bars (upto 40 mm diameters) for structural purposes

19 IS 1161                               :           Steel tubes for structural purposes

20 IS 1182      :  Recommended practice for radiographic examination of fusion welded butt joints in steel plates

21 IS 1200- (Pt. VIII)                :           Method of measurements of steel work and iron works

22 IS 1363 Part I                      :           Haxagon head bolts, screws, and nuts of product grade C (Hexagon Head bolt)

23 IS 1363 Part II                     :           Haxagon Head Bolts, screws and nuts of product Grade ‘C’

24 IS 1363 Part-III                   :           Haxagan Head Bolts, screws and Nuts of product grade ‘C’

25 IS 1367                               :           Technical supply conditions for threaded steel fasteners

26 IS 1599                               :           Method for bend test

27 IS 1608                               :           Metallic materials – Tensile Testing at Ambient Temperature.

28 IS 1821                               :           Dimensions for clearance holes for bolts and screws

29 IS 1852                               :           Rolling and cutting tolerance for hot rolled steel products

30 IS 1894                               :           Method for tensile testing of steel tubes

31 IS 1977                               :           Structural steel (ordinary quality)

32 IS 2062                               :           Hot Rolled low, medium and high tensile structural steel

33 IS 2074                               :           Ready mixed paint, air drying redoxide zinc chrome priming

34 IS 4351                               :           Specification for steel door frames

35 IS 4454 (Part I)                   :           Steel wires for mechanical springs. Cold drawn unalloyed steel wire.

36 IS 4711                               :           Methods for sampling of steel pipes, tube and fittings.

37 IS 4736                               :           Hot – dip zinc coating on mild steel tubes

38 IS 4923                               :           Hollow Steel Sections for Structural Use – Specification

39 IS 6248                               :           Metal rolling shutters and rolling grills

40 IS 7452                               :           Specification for hot rolled steel sections for doors, windows And ventilators.

FLOORING WORK

  1. IS 269 : Specification for 33 grade ordinary portland Cement
  1. IS 401 : Code of practice for preservation of timber
  1. IS 451 : Technical supply conditions for wood screws
  1. IS 455 : Specification for portland slag cement
  1. IS 661 : Code of practice for thermal insulation of cold storages
  1. IS 702 : Specification for industrial bitumen
  1. IS 1124 : Method of test for determination of water absortion, apparent specific gravity and porosity of natural                   building stones
  1. IS 1130 : Specification for marble (blocks, slabs and tiles)
  1. IS 1141 : Code of practice for Seasoning of timber
  1. IS 1200-(Part XI ) : Method of measurement of Building and Civil Engineering Work (Part 11) paving, floor                                             finishes, dado and skirting
  1. IS 1237- Edition 2.3 : Specification for cement concrete flooring tiles
  1. IS 1322 : Specification for bitumen felts for water proofing and Dampproofing
  1. IS 1443 : Code of practice for laying and finishing of cement concrete flooring tiles
  1. IS 1489 (Part-I) : Specification for portland pozzolana cement (Part-I) flyash Based
  1. IS 1489-(Part II) : Specification for Portland pozzolana cement (Part II) calcined clay based
  1. IS 1580 : Specification for bituminous compounds for water proofing And caulking purpose
  1. IS 2114 : Code of practice for laying in-situ terrazzo floor finish
  1. IS 2571 : Code of practice for laying in-situ cement concrete flooring
  1. IS 3622 :           Specification for sand stone (Slab & Tiles)
  1. IS 3670 : Code of practice for construction of timber floors
  1. IS 4457 : Acid and/or alkali Resistant tiles.
  1. IS 5318 : Code of practice for laying of hard wood parquet and wood block floors
  1. IS 5766 : Code of practice for laying of burnt clay brick floor
  1. IS 8041 : Specification for rapid hardening portland cement
  1. IS 8042 : Specification for white portland cement
  1. IS 8043 : Specification for hydrophobic portland cement
  1. IS 8112 : Specification for 43 grade ordinary portland cement
  1. IS 12330 : Specification for sulphate resisting portland cement.
  1. IS: 13630 (Part-1 to 15) : Methods of Testing of ceramic tiles
  1. IS 13712 : Specification for ceramic tiles; definition, classification characteristic and marking
  1. IS 15622 : Specification for pressed ceramic tile

 ROOFING WORK

  1. IS 73 : Specification for paving Bitumen
  1. IS 277 : Galvanised steel sheets (plain and corrugated)

3 IS 651    :           Glazed stoneware pipes and fittings

  1. IS 702 : Specification for industrial bitumen
  1. IS 1199 : Methods of sampling and analysis of concrete
  1. IS 1200 (PT.IX) : Method of measurements of building and civil engineering works:Part – 9 Roof covering (                                       including cladding)
  1. IS 1200 (PTX) : Method of measurements of building and civil engineering works:Part -10 ceiling and lining

8 IS 1230                                 :           Cast iron rain water pipes and fitting

  1. IS 1367 (PT -13) : Technical supply conditions for threaded steel fasteners pt.13 hot dip galvanized coating on                                      threaded fasteners

10 IS 2095 (PT-1)                    :           Gypsum plaster boards (Pt.1) plain Gypsum plaster boards

  1. IS 2115 :           Code of practice for flat roof finish: mud phuska
  1. IS 2633 : Method of testing uniformity of coating on zinc coated articles
  1. IS 2645 : Specification for integral water proofing compounds for cement mortar and concrete
  1. IS 3007 (PT.1) : Code of practice for laying of asbestos cement sheets: part- 1 Corrugated sheets
  1. IS 3007 (PT.2) : Code of practice for laying of asbestos cement sheets part- 2 Semicorrugated sheets
  1. IS 3087 : Particle boards of wood and other lignocellulogic materials (medium density) for general purposes –                    specifications
  1. IS 3144 : Methods of test for mineral wool thermal insulation materials
  1. IS 3346 : Method of the determination of thermal conductivity of thermal Insulation materials
  1. IS 3348 : Specification for fibre insulation boards
  1. IS 3384 : Specification for bitumen primer for water proofing and damp Proofing
  1. IS 4671 : Expanded polystyrene for thermal insulation purposes

22 IS 5382                               :           Specification for rubber sealing rings for gas mains, water mains and sewers

  1. IS 5688 : Methods of test of performed block type and pipe covering type thermal insulations
  1. IS 6598 : Cellular concrete for thermal insulation
  1. IS 7193 : Specification for glass fibre base coal tarpitch & bitumen felts (Amendment I)
  1. IS 8183 : Bonded mineral wool
  1. IS 10192 : Specifications for synthetic resin bonded glass fibre (SRBGF) For electrical purposes.
  1. IS 13592 : Unplasticised polyvinyl chloride (UPVC) pipes for soil and Waste discharge system for inside and                           outside building.
  1. IS 14753 : Specifications for polymethyl Methacrylate (PMMA) (Arylic) Sheets

30 IS 14862                             :           Fibre cement flat sheets – specifications

31 IS 14871                             :           Specifications for products in fibre reinforced cement – Long Corrugated or                                                                           Asymmetrical section sheets and fittings for roofing and cladding.

 FINISHING WORK

  1. IS 16(Pt-I) Shellac : Part : I : — Hand Made Shellac

IS 16(Pt-II) Shellac : Part : II    :           — Machine Made Shellac

  1. IS 75 : Linseed Oil Raw and Refined
  1. IS 77 : Linseed Oil Boiled For Paints
  1. IS 102 : Ready Mixed Paint, Brushing, Red Lead, Nonsetting, Priming
  1. IS 104 : Specification for Ready Mixed Paint, Brushing, Zinc Chrome,Priming
  1. IS 109 : Ready Mixed Paint, brushing, priming Plaster to Indian Standard Colour No.361, 631 White and off                      White
  1. IS 117 : Ready Mixed Paint, Brushing, Finishing Exterior, Semigloss for General Purposes to Indian Standards                 Colours.
  1. IS 133 : Enamel, Interior (a) Under Coating (b) Finishing
  1. IS 137 : Ready Mixed Paint, Brushing, Matt Or Egg Shell Flat, Finishing Interior to Indian Standard Colour as                  required
  1. IS 158 : Ready Mixed Paint, Brushin g, Bituminous Black, Lead Free, Acid, Alkali and Heat Resisting
  1. IS 217 : Specification for Cut Back Bitumen
  1. IS 218 : Specification for Creosote and Anthracene Oil For Use As Wood Preservatives
  1. IS 290 : Coal Tar Black Paint
  1. IS 337 : Varnish, Finishing Interior
  1. IS 341 : Black Japan, Types ‘A’, ‘B’ & ‘C’
  1. IS 347 : Varnish, Shellac for General Purposes
  1. IS 348 : French Polish
  1. IS 419 : Putty for Use On Window Frames
  1. IS 427 : Distemper, Dry Colour as Required
  1. IS 428 : Distemper, Oil Emulsion, Colour as Required
  1. IS 524 : Varnish, Finishing, Exterior, Synthetic Air Drying
  1. IS 533 : Gum Spirit of Turpentine (Oil of Turpentine)
  1. IS 712 : Specification For Building Limes
  1. IS 1200(Pt-XII)               :           Method of Measurements of Building and Civil Engineering Works :

Part : XII —                              :           Plastering and Pointing

  1. IS 1200(Pt-XIII)                                    :           Method of Measurements of Building and Civil Engineering Works :

Part : XIII —        :           White Washing, Colour Washing Distempering and Painting Of Building Surfaces.

  1. IS 1200(Pt-XV)                          :           Methods of Measurements of Building and Civil Engineering Works :

Part : XV —                              :           Painting, Polishing, Varnishing etc.

  1. IS 2339 : Aluminium Paint For General Purposes, in Dual Container
  1. IS 2547(Pt-II)                                       :           Gypsum Building Plasters Pt.II Premixed Light Weight Plasters
  1. IS 2932 : Enamel, Synthetic, Exterior (a) Undercoating, (b) Finishing
  1. IS 2933 : Enamel, Exterior (a) Undercoating (b) Finishing
  1. IS 5410 : Cement Paint
  1. IS 5411(Pt-1)                                       :           Plastic Emulsion : Paint Part I For Interior Use
  1. IS 6278 : Code of Practice For White Washing and Colour Washing

 

 REPAIRS TO BUILDING WORK

1  IS 419                                  :           Specifications for Putty for use in Window Frames

  1. IS 14900 : Specifications for Transparent Float Glass

 

 DISMANTLING & DEMOLISHING WORK

1 IS 1200 (Pt – XVIII) : Method of Measurements of Building and Civil EngineeringWorks

(Part –XVIII)                             :           Demolition and Dismantling

  1. IS 4130 : Demolition of Buildings–Code of Safety

ROAD WORK

1 IS 73 : Specification for paving bitumen

  1. IS 164 : Ready mixed paint for road marking
  1. IS 217 : Specification for cut back bitumen
  1. IS 8112 : Specification for 43 grade ordinary Portland Cement
  1. IS 278 : Specification for galvanized steel barbed wire for fencing
  1. IS 334 : Glossary of terms relating to bitumen and tar
  1. IS 383 : Specification for coarse and fine aggregate from natural sources for Concrete
  1. IS 460 : Specification for test sieves
  1. IS 516 : Method of test for strength of concrete
  1. IS 702 : Specification for industrial bitumen
  1. IS 712 : Specification for building limes
  1. IS 1195 : Specification for bitumen mastic for flooring
  1. IS 1199 : Methods of sampling and analysis of concrete
  1. IS 1203 : Method of testing tar and bituminous material, determination Of Penetration
  1. IS 1205 : Method of testing tar and bituminous material determination Of softening paint
  1. IS 1208 : Method of testing tar and bituminous material determination Of Ductility
  1. IS 1212 : Method of testing tar and bituminous material determination of loss of heating
  1. IS 1216 : Method of testing tar and bituminous material determination Of solubility in carbon-di-sulphide,                          trichloroethylene
  1. IS 1834 : Specification for hot applied sealing compound for joint in concrete
  1. IS 1838 (Pt.1) : Specification for performed fillers for expansion joint in Concrete pavements and structures                                   (non extruding and resilient type/ bitumen impregnated fibre)
  1. IS 2386 (Pt.I) : Method of test for aggregate for concrete particle size and shape
  1. IS 2386 (Pt. II) 1963 :  Method of test for aggregate for concrete estimation of Deleterious materials and                                                        organic impurities
  1. IS 2386 (Pt.III) : Method of test for aggregate for concrete specific gravity, density,voids, absorption and                                              bulking
  1. IS 2386 (Pt.IV) : Method of test for aggregate for concrete mechanical properties
  1. IS 2720 (Pt.V) : Method of test for soil: Determination of liquid and plastic limit.
  1. IS 2720 (Pt. VII) : Methods of test for soils: part VII determination of water content dry density relation using                                     light compaction
  1. IS 2720 (Pt. XXVIII) : Method of test for soil: determination of dry density of soils in place, by sand                                                                 replacement method
  1. IS 3812 : Specification for fly ash for use as pozzolana and admixture
  1. IS 5317 : Specification for bitumen mastic for bridges decking and roads
  1. IS 5640 : Method of test for determining aggregate impact value of soft Coarse Aggregates
  1. IS 6241 : Method of test for determination of stripping value of road Aggregates

IRC STANDARDS:

     1  IRC 10 : Recommended practice for borrow pits for road Embankments constructed by manual operation

  1. IRC 29 : Specification for bituminous concrete for road pavements
  1. IRC 36 : Recommended practice for construction of earth embankments for road works
  1. IRC 60 : Tentative guidelines for the use of lime flyash concrete as Pavement base of sub base
  1. IRC 88 : Recommended practice for lime flyash stabilized soil base/ sub base in pavement construction
  1. IRC 107 : Tentative specification for bitumen mastic wearing courses

 SANITARY INSTALLATIONS WORK

1 IS 771 (Pt.1) : Specification for glazed fire clay sanitary appliances:

Part 1: General requirements.

  1. IS 771 (Pt.-2) : Specification for glazed fire clay sanitary appliances: Part 2: Specific requirements of kitchen                                   and laboratory sink.
  1. IS 772 : Specific action for general requirements for enameled cast iron sanitary appliances.
  1. IS 774 : Flushing cisterns for water closets and urinals (Other than Plastic cistern)-Specifications.
  1. IS 1300 : Phenolic moulding materials.- Specifications
  1. IS 1703 : Water fittings- copper alloy float valves (horizontal plunger type) -Specification.
  1. IS 1729 : Cast iron /Ductile Iron Drainage Pipes and pipe fittings for Over ground non-pressure pipe line                              Socket and Spigot Series.
  1. IS 1795 : Specification for pillar taps for water supply purposes.
  1. IS 2267 : Polystyrene moulding and extrusion materials –Specifications
  1. IS 2326 : Specification for Automatic Flushing Cisterns for Urinals (Other than plastic cisterns)
  1. IS 2548 (Part-1) : Plastic seats and covers for water closets Part 1: Thermo set seats and covers – Specifications
  1. IS 2548 (Part-2) : Plastic seats and covers for water closets Part 2: Thermoplastic seats and covers.-                                                         Specifications
  1. IS 2556 : Vitreous sanitary appliances (vitreous china) –Specifications
  1. IS 2556 (Part-1) Part-1 : General requirements.
  1. IS 2556 (Part-2) Part-2: : Specific requirements of wash-down water closets.
  1. IS 2556 (Part-3) Part-3 : Specific squatting pans.
  1. IS 2556 (Part-4) Part-4 : Specific requirements of wash basins.
  1. IS 2556 (Part-5) Part-5 : Specific requirements of laboratory sinks.
  1. IS 2556 (Part-6) Part-6 : Specific requirements of Urinals & Partition plates
  1. IS 2556 (Part-7) Part-7 : Specific requirements of accessories for sanitary appliances
  1. IS 2556 (Part -14) Part-14 : Specific requirements of integrated squatting pans.
  1. IS 2556 (Part -15) Part-15 : Specific requirements of universal water closets.
  1. IS 2963 : Specification for Copper alloy waste fittings for wash basins and sinks.
  1. IS 3076 : Specification for low density polyethylene pipes for potable Water supplies.
  1. IS 3389 : Urea formaldehyde moulding materials. – Specifications
  1. IS 3989 : Specification for centrifugally cast (spun) iron spigot and socket soil, waste and ventilating pipes                           fittings and accessories.
  1. IS 4827 : Specification for electroplated coating of nickel and chromium On copper and copper alloys.
  1. IS 4984 : Specification for high density polyethylene pipes for potable Water supplies.
  1. IS 4985 : Unplasticised P.V.C. pipes for potable water supply – Specifications.

30 IS 7231                               :           Plastic flushing cisterns for water closets and urinals – Specifications.

  1. IS 13983 : Stainless steel sinks for domestic purposes –Specifications.

 

WATER SUPPLY  WORK

1 IS 554                                   :           Pipe threads where pressure tight joints are required on the threads-Dimensions,                                                                 tolerances and designation.

2 IS 778                                   :           Specification for copper alloy gate, and check valves for water Works Purposes

3 IS 779                                   :           Water meters (domestic type) –Specification

4 IS 780                                   :           Specification for sluice valves for water works purposes (50 to 300 mm size)

5 IS 781                                   :           Specification for cast copper alloy screw down bib taps and stop valves for water                                                                    services

6 IS 782                                   :           Specification for caulking lead

7 IS 909                                   :           Underground fire hydrant, sluice valve type-Specification

8 IS 1239 (Part 1)                    :           Steel tubes tubular and other wrought steel fittings, Part 1- Steel tubes-                                                                                     Specification

9 IS 1239 (Part 2)                    :           Specification for mild steel tubes tubular and other wrought Steel fittings, Part 2-                                                                  Mild street tubular and other wrought steel pipe fittings

10 IS 1536                               :           Centrifugally cast (spun) iron pressure pipes for water gas and sewage-                                                                                      Specification

11 IS 1537                               :           Specification for vertically cast iron pressure pipes for water, gas and Sewage

12 IS 1538                               :           Cast iron fittings for pressure pipes for water, gas and sewage -Specification

13 IS 1703                               :           Water fittings – copper alloy float valves (horizontal plunger type) -Specification

14 IS 2692                               :           Ferrules for water services- Specification

15 IS 3950                               :           Specification for surface boxes for sluice valves

16 IS 4736                               :           Specification for Hot-dip Zinc Coatings on mild steel tubes

17 IS 5312 (Part 1) :           Swing type reflex (non return) valves for water works purposes. Part 1-Single door pattern

18 IS 5312 (Part 2) : Swing type reflex (non return) valves for water works purposes. Part 2-Multi door pattern

19 IS 5382                               :           Rubber sealing rings for gas mains, water mains and sewers

20 IS 9762                               :           Specification for polyethylene floats (spherical) for float valves

21 IS 9763      :           Plastic Bib taps and stop valves (rising spindle) for cold water servicesspecifications

22 IS 15450                             :           PE-AL-PE Pipes for hot and cold water supplies- Specifications

23 IS 15778                             :           Chlorinated Polyvinyl Chloride (CPVC) pipes for potable hot and cold water                                                                            distribution supplies-specifications.

24 IS 15801       :           Polypropylene- Random Copolymer Pipes for hot and cold Water supplies-Specifications

DRAINAGE  WORK

  1. IS 458 : Pre-cast Concrete Pipes (with and without reinforcement).
  1. IS 651 : Specification for Salt Glazed Stoneware Pipes and Fittings.
  1. IS 783 : Code of Practice for Laying Concrete Pipes
  1. IS 1726 : Specification for Cast Iron Manhole Covers and Frames
  1. IS 1729 : Cast Iron /Ductile Iron Drainage Pipes and Pipe Fittings Socket and Spigot Series for Over-ground                        Non-pressure Pipe Line.
  1. IS 4127 : Code of Practice for Laying of Glazed Stone Ware Pipes
  1. IS 4885 : Specifications for Sewer Bricks
  1. IS 12592 : Pre-cast Concrete Manhole Covers and Frames – Specifications

PILE  WORK

  1. IS-1200 (Part 23) : Method of measurement of building and Civil Engineering Works – Piling.
  1. IS-2911 (Part 1/Sec. 1) : Code of practice for Design and Construction of pile foundation. Driven cast-in-situ                                                   piles.
  1. IS-2911 (Part 1/Sec. 2) : Code of practice of Design and Construction of pile foundation. Bored Cast-in-situ                                                      piles.
  1. IS-2911 (Part 1/Sec. 3) : Code of practice for Design and Construction of pile foundation. Driven pre-cast                                                         concrete piles.
  1. IS-2911 (Part 1/Sec. 4) : Code of practice for Design and Construction of pile foundation. Bored pre-cast                                                            concrete piles.
  1. IS-2911 (Part 3) : Code of practice for Design and Construction of pile foundation. Under reamed piles.
  1. IS-2911 (Part 4) : Code of practice for design and Construction of pile foundation. Load test on piles.
  1. IS-5112 : Safety Code for piling and other deep foundations.
  1. IS-6426 : Specification for pile driving hammer.
  1. IS-6427 : Glossary of terms relating to pile driving.
  1. IS-6428 : Specification for pile frame.
  1. IS-9716 : Guide for lateral dynamic load test on piles.
  1. IS-14362 : Pile boring equipments. General requirements.

ALUMINIUM WORK

  1. IS 733 : Wrought Aluminium and Aluminium Alloys, Bars, Rods and Sections (For General Engineering                               Purposes) –Specification
  1. IS 737 : Wrought Aluminium and Aluminium alloy sheet and strip for General engineering purposes –                                Specification
  1. IS 1285 : Wrought Aluminium and Aluminium Alloy, Extruded Rond Tube and Hollow sections (For General                      Engineering Purposes) – Specification
  1. IS 1868 : Anodic coating on Aluminium and its Alloys-Specification
  1. IS 1948 : Specification for Aluminium Doors, Windows and Ventilators
  1. IS 3908 : Specification for Aluminium equal leg angles
  1. IS 3909 : Specification for Aluminium unequal leg angles
  1. IS 3965 : Dimensions for wrought Aluminium and Aluminium Alloys bars, rods and sections.
  1. IS 5523 : Method of testing anodic coating on aluminium and its alloys.
  1. IS 6012 : Measurement of coating thickness by Eddy Current Method
  1. IS 6315 : Floor springs (Hydraulically regulated) for heavy doors- Specifications
  1. IS 6477 : Dimensions of extruded hollow section and tolerances
  1. IS 12823 : Wood products- Pre-laminated particle board –Specifications.
  1. IS 14900 : Transparent Float glass- Specifications.

WATERPROOFING TREATMENT WORKS

  1. IS 73 : Paving Bitumen Specifications
  1. IS 702 : Specifications for Industrial Bitumen
  1. IS 1322 : Specifications for Bitumen felts for Water Proofing and Damp Proofing.
  1. IS 2645 : Specifications for Integral Cement Water Proofing Compounds
  1. IS 3370 (Part -1) : Code of Practice for Concrete Structures for the Storage of Liquid: Part -1 General                                                       Requirements.
  1. IS 3384 : Specifications for Bitumen Primer for Water Proofing and Damp Proofing
  1. IS 7193 : Specification for Glass Fibre Bitumen Felts
  1. IS 12200 : Provision of Water Stops at Transfers Construction Joints in Masonry and Concrete Dams – Code of                        Practice.
  1. IS 12432 (Part-3) : Application for Spray Applied Insulation – Code of Practice Part-3 Polyurethane/                                                         Polyisocyarurate

 

Leave a Reply

Your email address will not be published. Required fields are marked *

© 2019: Welcome to Civil-Estimation | Awesome Theme by: D5 Creation | Powered by: WordPress